Results 1 to 3 of 3

Thread: Carbon Cub EX Carby heat diverted....wear...yyyy

  1. #1
    Junior Member
    Join Date
    Apr 2014
    Location
    Brisbane Australia
    Posts
    19

    Default Carbon Cub EX Carby heat diverted....wear...yyyy

    Hi guys
    my carburettor hot air diverted has very worn bushes and causing slop in the butterfly valve,when using carby heat the cable wonít return due to the wear......How do you get the butterfly out as itís all welded at assembly???????
    is there any mods on this as the only way to get it apart is grind the weld off remove butterfly and rebush then weld it back up ....seems like a lot of in necessary work.....most systems the butterfly is screwed to the actuating shaft.....
    thanks look forward to your feedback....
    Kenny

  2. #2
    Senior Member stede52's Avatar
    Join Date
    Nov 2013
    Location
    Carnation, WA
    Posts
    183

    Default Re: Carbon Cub EX Carby heat diverted....wear...yyyy

    Cubcrafters has fixed that issue with a new bushing system on the butterfly
    Steve Dentz
    N419LD
    Carnation, WA

  3. #3
    Junior Member
    Join Date
    Dec 2017
    Location
    Yakima, WA
    Posts
    3

    Default Re: Carbon Cub EX Carby heat diverted....wear...yyyy

    You can give us a call here at cubcrafters (509)248-9491 ask for parts and order an updated carb box assembly, it's now updated to the current revision.
    It's part number PC54400-001OH

    Hope this helps!


    Quote Originally Posted by Kenny Edwards View Post
    Hi guys
    my carburettor hot air diverted has very worn bushes and causing slop in the butterfly valve,when using carby heat the cable wonít return due to the wear......How do you get the butterfly out as itís all welded at assembly???????
    is there any mods on this as the only way to get it apart is grind the weld off remove butterfly and rebush then weld it back up ....seems like a lot of in necessary work.....most systems the butterfly is screwed to the actuating shaft.....
    thanks look forward to your feedback....
    Kenny
    Last edited by Laceighhiebert; 09-12-2018 at 04:33 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •