Hi fellow builders and flyers
Not a major issue but would like to ask the question,both my Carbon Cub and another I have recently completed an inspection on shows signs of “slop” in or between between the AN5 bolts that connect the stabiliser tube link ( TC2537-001 ) and the yoke ( SC82200 )..bolts appear ok ..no steps wear seems to be in the bolt holes...My question has anybody encountered this and is there any “Fix”...bushes ect...,both aircraft are between 200 and 300 old.This wear is evident if you grab the stabilised and move up and down on the L/E,whilst looking at the bolts.
look forward to any feedback
thanks
kenny Edwards
Australia