Results 1 to 3 of 3

Thread: Wear and Tear...dwards

  1. #1
    Junior Member
    Join Date
    Apr 2014
    Location
    Brisbane Australia
    Posts
    19

    Default Wear and Tear...dwards

    Hi fellow builders and flyers
    Not a major issue but would like to ask the question,both my Carbon Cub and another I have recently completed an inspection on shows signs of “slop” in or between between the AN5 bolts that connect the stabiliser tube link ( TC2537-001 ) and the yoke ( SC82200 )..bolts appear ok ..no steps wear seems to be in the bolt holes...My question has anybody encountered this and is there any “Fix”...bushes ect...,both aircraft are between 200 and 300 old.This wear is evident if you grab the stabilised and move up and down on the L/E,whilst looking at the bolts.
    look forward to any feedback
    thanks
    kenny Edwards
    Australia

  2. #2
    Senior Member Jon Delamarter's Avatar
    Join Date
    Feb 2013
    Location
    Yakima, WA
    Posts
    204

    Default Re: Wear and Tear...dwards

    Kenny,

    Please see pic below. Are you referring to the bolts marked green? These pass through NAS75-4-007 bushings which are press fit into the SC82200-001 yoke assembly.

    Stab Yoke Assy.png
    Attached Images Attached Images
    Jon Delamarter
    Customer Support Manager
    Cub Crafters, Inc.
    jond@cubcrafters.com
    Office (509)367-5200
    Cell (509)833-6993

  3. #3
    Super Moderator Mitch's Avatar
    Join Date
    Jan 2010
    Location
    Yakima, Washington
    Posts
    154

    Default Re: Wear and Tear...dwards

    Kenny

    The Carbon Cub EX does not use a bushing in the yoke. How much movement does the front of the stabilizer have. You will have some movement in the jack screw and attaching hardware.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •