Results 1 to 2 of 2

Thread: TRIG Transponder 21/22 Brightness

  1. #1
    Junior Member
    Join Date
    Dec 2015
    Location
    Pendleton OR
    Posts
    28

    Default TRIG Transponder 21/22 Brightness

    Has anyone else encountered no option to adjust the brightness of the TRIG transponder control head by using the FN and code buttons during setup? Our is very dim and there is not a Brightness option as described in the operator and user manuals.
    Thanks
    Justin / Tom

  2. #2
    Member
    Join Date
    Dec 2016
    Location
    Yakima WA
    Posts
    38

    Default Re: TRIG Transponder 21/22 Brightness

    The following is copied and pasted right out of the Trig TT21/22 install manual, rev AM from May 2015 which I believe is the latest revision. I do not believe this is in the set up part of the menu but is just accessed in normal operating mode.

    8.9 Display Brightness Control
    Pressing the FN button will allow access to change the display brightness. A
    bar will appear on the display with the title “Brightness” above the bar. Rotate
    the Code Knob to select the desired brightness level. Press FN to save the
    setting and return to the Squawk code display.


    hope that helps,

    Mike Sutton
    Cubcrafters Avionics

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •