In the Wing Inspection Sheet #4 there is reference in item 1.9 to check if the Fairleads are installed.
There is no prior instruction in text or diagrams in the Std Wing Manual where these parts are fixed.

Assuming the parts in question are SC31065-003 (6x) and SC31065-001 (2x) labelled as "grommets" for each wing, it is not obvious exactly where they are fixed.
Two possibilities arise
either
where the Drag Wires pass through rib#6 (only 2)
or
at the rib cutouts at the front or rear spar for later wiring routes for lights? (12x)

Can someone confirm their location from page number or diagram and purpose in each case?

Thanks