Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: Spring gear

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Junior Member
    Join Date
    Aug 2013
    Location
    Pine, CO
    Posts
    2

    Default Spring gear

    Will a version of the spring gear ever be developed for the PA-18?
    Last edited by Amre2me2; 12-29-2016 at 02:30 AM.

  2. #2
    Junior Member
    Join Date
    Aug 2013
    Location
    Pine, CO
    Posts
    2

    Default Re: Spring gea

    Yes, like on the Xcub. Less drag. +14 mph is why.

  3. #3
    Senior Member Dan L's Avatar
    Join Date
    Jul 2010
    Location
    Montana
    Posts
    766

    Default Re: Spring gea

    Like this?

    image.jpg

    1.75" Grove calipers, 1.50" dia. Axle, 31" tires and AOSS, one-piece stainless steel brake lines from cylinders.
    Flying Carbon Cub EX #11 since 2011

  4. #4
    Senior Member Dan L's Avatar
    Join Date
    Jul 2010
    Location
    Montana
    Posts
    766

    Default Re: Spring gea

    I agree with Glenn on the gear. There are some things about a Super Cub type airplane that make it what it is and capable of landing and taking off from unimproved areas. The Cub-style gear being one of those.

    But not everyone is needing those features and spring gear would be much more streamlined.
    Flying Carbon Cub EX #11 since 2011

  5. #5
    Senior Member John Hodges's Avatar
    Join Date
    Feb 2010
    Location
    Arroyo Grande, CA
    Posts
    692

    Default Re: Spring gea

    Now all you need are the Acme Aero Fab shocks, and you'll have the best setup available.
    Let us know if you want a set.

  6. #6
    Senior Member Mark Keneston's Avatar
    Join Date
    Dec 2016
    Location
    Saratoga Springs, NY
    Posts
    462

    Default Re: Spring gear

    Quote Originally Posted by Amre2me2 View Post
    Will a version of the spring gear ever be developed for the PA-18?

    Improved aero dynamics and increased speed and also fewer parts as the brake line is Gun Drilled in that piece and the gear is your brake line. No brake lines running down the gear? MK
    Last edited by Mark Keneston; 12-30-2016 at 03:05 PM.

  7. #7
    Senior Member randylervold's Avatar
    Join Date
    Jan 2010
    Location
    Yakima, WA
    Posts
    1,378

    Default Re: Spring gea

    There is virtually no chance CubCrafters will ever make spring gear as a retrofit for the PA18. The main reason is that the fuselage structure where the gear attaches is significantly different. With "legacy gear" the loads (stresses) are spread over two attach points whereas with the spring gear both the gear itself and the fuselage structure must be stout enough to withstand pretty considerable loads in every direction that are concentrated at a single point. As I watched all of the Part 23 certification testing way back during that phase I was quite surprised how onerous it is.

    The spring gear has some significant benefits, which is why we developed it for the XCub, but it is heavier, more expensive, and must have a fuselage designed specifically for it.
    Randy Lervold

  8. #8
    Senior Member Dan L's Avatar
    Join Date
    Jul 2010
    Location
    Montana
    Posts
    766

    Default Re: Spring gea

    [QUOTE=randylervold;17593

    The spring gear has some significant benefits, which is why we developed it for the XCub, but it is heavier, more expensive, and must have a fuselage designed specifically for it.[/QUOTE]

    It is easy to see that spring gear is much cleaner compared to draggy Cub gear and that cruise speeds would be improved. What other benefits go with spring gear?
    Flying Carbon Cub EX #11 since 2011

  9. #9
    Administrator Pete D's Avatar
    Join Date
    Jan 2010
    Location
    Yakima, WA
    Posts
    1,158

    Default Re: Spring gea

    Quote Originally Posted by Dan L View Post
    It is easy to see that spring gear is much cleaner compared to draggy Cub gear and that cruise speeds would be improved. What other benefits go with spring gear?


    Fewer pieces to make/inventory/assemble and remove/install when going on and off of floats.

    No moving parts to maintain.
    Pete Dougherty
    Customer Support Manager
    Cub Crafters Inc

  10. #10
    Senior Member
    Join Date
    Aug 2015
    Location
    Yakima, WA
    Posts
    313

    Default Re: Spring gear

    Quote Originally Posted by Cubdriver2 View Post
    Sounds like a good fit? How does it differ from a Scouts landing gear as they are both in the same mission catagory?
    Glenn
    Scout is a neat airplane and has some nice features. Most Scouts have spring steel gear though, until they changed to aluminum in 2004. It's always a bit difficult to make comparisons with all aspects considered, as with this case, since the Scout differs by: sitting higher on ground and at a different nose high attitude, has different wing and wing loading, typically has a higher empty weight, has a lower gross weight, was certified to older regulations revision level, etc., etc. And...it's not a Cub/Xcub !
    Last edited by Pat Horgan; 01-06-2017 at 05:27 PM.
    Patrick Horgan
    President
    CubCrafters | Yakima WA

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •