What Do I Need to Install Before Covering?

[Daveembry]

No, that is NOT the right place. Check out my post #13 here http://forum.cubcrafters.com/showthr...light=EX3+tips

That predrilled area is for the factory installed ADHRS. You want to go to bay 5. The post explains with photos.

Thanks, Those pre-drilled holes look like those between ribs 6 and 7 on the EX2.
Is there a standard location in the wing manual for the pitot head?
The pneumatic tube is shown to terminate between ribs 4 and 5 in photo 186 on page 137 of the wing manual, adjacent to the wing strut support.
Cheers