Hi all,
Just like to voice my concerns over the length of the propeller 3/8" attachment bolts supplied with the Carbon Cub kit with Catto prop and ECI engine.During the fitting of the propeller it was noticed the supplied bolts ..4.5" long...were to short and NOT protruding through the threaded bosses on the crankshaft flange.I was able to obtain the correct length bolt through Catto who advised the supplied bolts were in fact incorrect and the correct 5" bolts should be used in its place.Normal practice is 1 to 3 threads protruding through the flange boss.Suggest a closer inspection of this area...
Not wanting to put anybody off side just my concerns..
kenny Edwards
Brisbane Australia