-
Senior Member
Jury Struts
This might save someone a phone call. When I went to put my jury struts on today the manual states that two struts should be long and two short. All four of mine were the same length. After a quick call to Mitch he confirmed that now all jury struts are the same length. Just thought I would pass it along to save someone else the question.
On another note, one thing I wish I would have done before hand is ream the lower strut attach holes before I put the landing gear on. I was able to ream the rear hole but not the front one. The landing gear was in the way. A 10 second job to get a bolt through a hole turned into 30 min job for each side!
Mike
-
Senior Member
Re: Jury Struts
Thanks for the info on the jury struts. I am about there
Agree on the landing gear bolts. Seems there was a bit of distortion, I assume from the fabric. Really took some force to get those bolts seated regardless of them being reamed.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules