Results 1 to 5 of 5

Thread: Stratux - ADS-B Receiver Build Project

  1. #1
    Junior Member
    Join Date
    Sep 2014
    Location
    Kansas City,KS (k34)
    Posts
    10

    Default Stratux - ADS-B Receiver Build Project


  2. #2
    Senior Member
    Join Date
    Apr 2012
    Location
    Canyon Country, CA
    Posts
    115

    Default Re: Stratux - ADS-B Receiver Build Project

    Quote Originally Posted by BanksT View Post
    If someone did a certified ADS-B out for $120 I might.
    Chuck Hull
    L70 Agua Dulce, CA

  3. #3
    Member
    Join Date
    Aug 2012
    Location
    phoenix,az
    Posts
    39

    Default Re: Stratux - ADS-B Receiver Build Project

    Quote Originally Posted by BanksT View Post

    Yes I built one - already had a raspberry PI and an SDR from a previous project. It takes about 15 mins to put it together. I found it a good introduction as to what ADS-B in can do. If you need help drop me a PM but it's really simple. I did a preso at our local EAA chapter eaa538.org, one of the other members put this together - stratux guide

  4. #4
    Junior Member
    Join Date
    Mar 2016
    Location
    Canada
    Posts
    1

    Default Re: Stratux - ADS-B Receiver Build Project

    Can you please share your system details here?
    How you connected the raspberry pi in your system?
    Also what are the specifications for the receiver which you built?

    printed circuit board assembly
    Last edited by KoryBorah; 03-11-2016 at 02:27 PM.

  5. #5
    Junior Member
    Join Date
    Sep 2014
    Location
    Kansas City,KS (k34)
    Posts
    10

    Default Re: Stratux - ADS-B Receiver Build Project

    See attached pictures.
    Interfaced w/ wifi to ipad mini or iphone
    utilized "standard" dual band recommended kit from stratux.me (ordered off of amazon)
    Attached Images Attached Images

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •