Results 1 to 4 of 4

Thread: Stratux - ADS-B Receiver Build Project

  1. #1
    Junior Member
    Join Date
    Sep 2014
    Location
    Kansas City,KS (k34)
    Posts
    10

    Default Stratux - ADS-B Receiver Build Project


  2. #2
    Senior Member
    Join Date
    Apr 2012
    Location
    Canyon Country, CA
    Posts
    115

    Default Re: Stratux - ADS-B Receiver Build Project

    Quote Originally Posted by BanksT View Post
    If someone did a certified ADS-B out for $120 I might.
    Chuck Hull
    L70 Agua Dulce, CA

  3. #3
    Member
    Join Date
    Aug 2012
    Location
    phoenix,az
    Posts
    39

    Default Re: Stratux - ADS-B Receiver Build Project

    Quote Originally Posted by BanksT View Post

    Yes I built one - already had a raspberry PI and an SDR from a previous project. It takes about 15 mins to put it together. I found it a good introduction as to what ADS-B in can do. If you need help drop me a PM but it's really simple. I did a preso at our local EAA chapter eaa538.org, one of the other members put this together - stratux guide

  4. #4
    Junior Member
    Join Date
    Sep 2014
    Location
    Kansas City,KS (k34)
    Posts
    10

    Default Re: Stratux - ADS-B Receiver Build Project

    See attached pictures.
    Interfaced w/ wifi to ipad mini or iphone
    utilized "standard" dual band recommended kit from stratux.me (ordered off of amazon)
    Attached Images Attached Images

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •