Page 8 of 8 FirstFirst 12345678
Results 71 to 73 of 73

Thread: T3 Tailwheel Suspension?

  1. #71
    Senior Member Dan L's Avatar
    Join Date
    Jul 2010
    Location
    Montana
    Posts
    636

    Default Re: T3 Tailwheel Suspension?

    Iíve flown a lot more with the T3 since my last post. It didnít occur to me until today that something else had changed with the T3. I land in the grass about 100 yards in front of my hangar and itís a bit rough and uneven there. With the old Pawnee spring and the Baby Bushwheel and back-stick I would feel some feedback in the stick as I taxied over the more uneven areas. I assumed the fuselage was flexing a bit and causing the elevator cables to tighten up and then relax. Thatís gone now. No more stick feedback with the T3. It can be easy to forget something when itís no longer there.
    Flying Carbon Cub EX #11 since 2011

  2. #72
    Member hawgdrvr's Avatar
    Join Date
    Jul 2020
    Location
    Richmond, VA
    Posts
    72

    Default Re: T3 Tailwheel Suspension?

    Good to know. I'm staying with the stock tailwheel off the line with my FX3 but have heard good things about the T3 so it's on my list for the future to consider.
    Neal
    FX3 On Order (May 2021)
    Richmond, VA

  3. #73
    Member hawgdrvr's Avatar
    Join Date
    Jul 2020
    Location
    Richmond, VA
    Posts
    72

    Default Re: T3 Tailwheel Suspension?

    Here is the video on the T3. Looks great.

    Neal
    FX3 On Order (May 2021)
    Richmond, VA

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •