Results 1 to 5 of 5

Thread: Epenage irregularities.

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Junior Member
    Join Date
    Apr 2014
    Location
    Brisbane Australia
    Posts
    21

    Default Epenage irregularities.

    Hi fellow CC builders
    Can anybody shed some light on the misalignment issue or share my frustrations of my empennage components.This is the second set of Univair produced stabilisers fitted that have jigging problems resulting in 1.3* angular difference L/H to R/H at the tip rib on installation resulting in almost 1/2" misalignment at the elevator horn.Any ideas,I have tried bending one stabiliser but believe this is not the answer as the fabric is now slightly deformed and quite possibly has jinked the rib profile which doesn't sit well with me.Appreciate any worthwhile feedback
    regards
    Kenny Edwards
    Australia.
    Attached Images Attached Images

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •