Results 1 to 3 of 3

Thread: G3X Installation Training

  1. #1
    Member Dickey's Avatar
    Join Date
    Dec 2014
    Location
    Zillah, WA
    Posts
    49

    Default G3X Installation Training

    Just wanted to let folks know that there is an avionics training course available for the EAB folks that uses the G3X platform. The classes are being held in December at the AEA headquarters near Kansas City. Here' the link for more info.

  2. #2
    Senior Member Cubrath's Avatar
    Join Date
    Jun 2013
    Location
    Spearfish, SD
    Posts
    302

    Default Re: G3X Installation Training

    If you buy the G3X panel from CubCrafters I don't think you will need to take a course. Everything is pre-wired and is pretty much plug and play. I think I soldered a total of 10 wires in the whole process.

  3. #3
    Member Dickey's Avatar
    Join Date
    Dec 2014
    Location
    Zillah, WA
    Posts
    49

    Default Re: G3X Installation Training

    That's true. We try to complete as much of the harness as practical. For those folks that are interested in building their own harnesses or want to understand how the system is designed in case they need to do troubleshooting or a repair, they might find this informative. Just thought I'd pass this along.
    Matt Dickey
    Manager,

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •