Page 3 of 5 FirstFirst 12345 LastLast
Results 21 to 30 of 46

Thread: Engine install Questions (Help)

  1. #21
    Senior Member Cubrath's Avatar
    Join Date
    Jun 2013
    Location
    Spearfish, SD
    Posts
    302

    Default Re: Engine install Questions (Help)

    That 58" is used to go around the engine inlets. There should be three parts for each side. Bands, screw attachment side and side with the holes to screw into. I had the bands and the screw end of the clamp but I was missing the other part of the clamp that you screw into.
    Attached Images Attached Images
    Last edited by Cubrath; 09-25-2015 at 07:19 PM.

  2. #22
    Senior Member c130jake's Avatar
    Join Date
    Jun 2012
    Location
    Minneapolis, MN
    Posts
    190

    Default Re: Engine install Questions (Help)

    Thanks, I need the correct clamps for the cabin heat muff apparently.


    Sent from my SM-G920V using Tapatalk
    Jake
    Finished CCEX N96FV!

  3. #23
    Senior Member Cubrath's Avatar
    Join Date
    Jun 2013
    Location
    Spearfish, SD
    Posts
    302

    Default Re: Engine install Questions (Help)

    You have them. Those are the eight clamps.
    Attached Images Attached Images
    Last edited by Cubrath; 09-25-2015 at 07:08 PM.

  4. #24
    Senior Member c130jake's Avatar
    Join Date
    Jun 2012
    Location
    Minneapolis, MN
    Posts
    190

    Default Re: Engine install Questions (Help)

    Do you take two and put them together? The clamps in the bag are 1 3/4.

    Sent from my SM-G920V using Tapatalk
    Jake
    Finished CCEX N96FV!

  5. #25
    Senior Member Cubrath's Avatar
    Join Date
    Jun 2013
    Location
    Spearfish, SD
    Posts
    302

    Default Re: Engine install Questions (Help)

    Quote Originally Posted by c130jake View Post
    Do you take two and put them together? The clamps in the bag are 1 3/4.

    Sent from my SM-G920V using Tapatalk

    Exactly, take two and put them together to make one long one!!

  6. #26
    Senior Member c130jake's Avatar
    Join Date
    Jun 2012
    Location
    Minneapolis, MN
    Posts
    190

    Default Re: Engine install Questions (Help)

    Thanks!

    Sent from my SM-G920V using Tapatalk
    Jake
    Finished CCEX N96FV!

  7. #27
    Senior Member c130jake's Avatar
    Join Date
    Jun 2012
    Location
    Minneapolis, MN
    Posts
    190

    Default Re: Engine install Questions (Help)

    I see it now, blurry on my ipad, daisy chain two together. Should have zoomed in more.

    Sent from my SM-G920V using Tapatalk
    Jake
    Finished CCEX N96FV!

  8. #28
    Senior Member c130jake's Avatar
    Join Date
    Jun 2012
    Location
    Minneapolis, MN
    Posts
    190

    Default Re: Engine install Questions (Help)

    Another question....I know I am too tired but I can not find the hardware breakout for the cabin heat connection. I thought it was in with the throttle/mixture/carb heat but I can't find it. I looked in the fuselage manual where the cabin heat box/gascolator break out is but no parts breakout.
    I wish there was a master parts breakdown by system or master index. Too many manuals and PDFs to search thru.

    Pete and Cubrath, I owe you lunch or dinner.

    Jake


    Sent from my iPad using Tapatalk
    Jake
    Finished CCEX N96FV!

  9. #29
    Senior Member Cubrath's Avatar
    Join Date
    Jun 2013
    Location
    Spearfish, SD
    Posts
    302

    Default Re: Engine install Questions (Help)

    It's in the Finish Manual, page 21.
    Attached Images Attached Images

  10. #30
    Senior Member c130jake's Avatar
    Join Date
    Jun 2012
    Location
    Minneapolis, MN
    Posts
    190

    Default Re: Engine install Questions (Help)

    Thanks again...I looked in the parts manual for the factory airplane and the parts breakout was missing.


    Sent from my iPad using Tapatalk
    Jake
    Finished CCEX N96FV!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •