Results 1 to 5 of 5

Thread: Baffling clamp

  1. #1
    Senior Member Cubrath's Avatar
    Join Date
    Jun 2013
    Location
    Spearfish, SD
    Posts
    302

    Default Baffling clamp

    It's the weekend so I can't make my call to Mitch. Can anyone explain how this clamp works for the front of the plenum? I see how the slot works for the one end but how do you tighten it up? You can't screw it on?? Manual only shows the two part numbers. Not sure what I'm missing?
    Attached Images Attached Images

  2. #2
    Senior Member EVRoosevelt's Avatar
    Join Date
    Jan 2010
    Location
    Wilsonville, AL
    Posts
    189

    Default Re: Baffling clamp

    You have it right the screw end fits into the opposite end of the strap it holds the red rubber baffle material to the plenum
    EV

  3. #3
    Senior Member Cubrath's Avatar
    Join Date
    Jun 2013
    Location
    Spearfish, SD
    Posts
    302

    Default Re: Baffling clamp

    EV,

    Thanks for the reply. It's a worm drive screw but there is no holes in the band like a traditional band clamp. I tried to thread it in but it wouldn't go. Didn't want to force it. I'm sure it's a simple thing but it's just not making since right now!

    Mike

  4. #4
    Senior Member EVRoosevelt's Avatar
    Join Date
    Jan 2010
    Location
    Wilsonville, AL
    Posts
    189

    Default Re: Baffling clamp

    here is the part you are missing
    EV
    Attached Images Attached Images

  5. #5
    Senior Member Cubrath's Avatar
    Join Date
    Jun 2013
    Location
    Spearfish, SD
    Posts
    302

    Default Re: Baffling clamp

    Now it makes sense! I will see if I can track that down!

    Thanks EV

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •