Hi all ,just starting my engine build up and have run into a issue with this service bulliten SB00027... My new engine didn't have the oil temp probe installed,and instead a plastic plug from the factory.....I removed the hex head blank and installed the new temp probe then attempted to install the supplied blanking plug into the larger of the two holes....The old style probe won't screw in more than about 1/8 th turn and similarly the blanking plug supplied won't go either ,don't want to force it as its going to ruin the engine case thread.....Has anybody else encountered this problem....Also the two 90* oil fitting -8's can't be found in the kit or tote boxes ,please let's know if I'm looking i the wrong place and very interested to resolve this frustrating issue.
Kenny Edwards
Aussie CC