Results 1 to 5 of 5

Thread: Dynon Fuel Flow Calibration

  1. #1
    Member Becky Teerink's Avatar
    Join Date
    Jan 2010
    Location
    Yakima, WA
    Posts
    85

    Default Dynon Fuel Flow Calibration

    Thought these instructions might be helpful for those of you trying to dial in your fuel flow on the FlightDEK-D180!!
    Attached Files Attached Files
    Becky Teerink

  2. #2
    Senior Member
    Join Date
    Jan 2010
    Location
    Copper Mountain, CO
    Posts
    167

    Default Re: Dynon Fuel Flow Calibration

    Thanks!!!!

  3. #3
    Senior Member turbopilot's Avatar
    Join Date
    Feb 2010
    Location
    La Quinta, CA
    Posts
    412

    Default Re: Dynon Fuel Flow Calibration

    Quote Originally Posted by Becky Teerink View Post
    Thought these instructions might be helpful for those of you trying to dial in your fuel flow on the FlightDEK-D180!!
    Is the K value tag in the airplane documentation?
    Bob Anderson, CC11-00316, N382RA

  4. #4
    Senior Member Pete D's Avatar
    Join Date
    Jan 2010
    Location
    Yakima, WA
    Posts
    931

    Default Re: Dynon Fuel Flow Calibration

    I'm not sure if they put the actual K value tag in the paperwork or not, but the number is supposed to be programed in when they do the initial programing here at the factory. They do not do the fine tune calibration calculations however, as that requires several fuel tank top offs and they don't fly them that much here.

    Pete

  5. #5
    Member Becky Teerink's Avatar
    Join Date
    Jan 2010
    Location
    Yakima, WA
    Posts
    85

    Default Re: Dynon Fuel Flow Calibration

    Quote Originally Posted by turbopilot View Post
    Is the K value tag in the airplane documentation?
    Like Pete said, it is programmed in here at the factory. Production is telling me that the K-factor for the Dynon units is always 68000.
    Becky Teerink

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •