I have a new Carbon Cub (serial number 335) with a Garmin Executive Glass Touch panel. I did not get a engine operating instruction manual with the plane. This was explained to me to be because the new Titan engine has not yet had a manual. Looking in on the Cub Crafters website the only information I can find is how to build an engine not how to operate it.
Because I have Executive glass I have all the engine information such as CHTs, EGTs, oil temps, ect.
It is frustrating to not know what I should do operationally, such as recommended settings for Cruise, Climb, Decent, and so on. Also no information about recommended CHTs or EGTs - how hot for prolonged periods and so on. I am concerned that the engine gets too hot in climb and would like to know what other owners are doing and what to watch for.
I come from a turbine so I am not used to flying a piston and like to know what the manufacture recommends.
I also, would appreciate any advice from the forum members.
Thanks,
Duane Frederiksen
Carbon Cub N620CC