Results 1 to 1 of 1

Thread: CNC stick grip

  1. #1
    Member
    Join Date
    Dec 2012
    Location
    Sangerville Maine
    Posts
    39

    Default CNC stick grip

    image.jpg[ATTACH]3203[/ATTACH
    I've been flying with a prototype stick grip that protects the trim switch. From my days driving superubs, I have a habit of resting my hand on top of the stick. Several times the result has been an abrupt change of trim. The grip slides onto the stick and two O-rings maintain a snug fit. The mic PTT is still clear.
    The grip in the photo works for me. I usually operate the trim switch with my index finger.
    The grip is turned from Delrin. It would be an easy matter to spit out more if anyone else likes the concept. Jake 207 924 5905 My stick O.D. is about 1.135 . Since the part is programmed , it would be an easy matter to change parameters. For instance, the protective radius could be closer to the switch.
    Attached Images Attached Images
    Last edited by 1473C; 09-04-2014 at 09:55 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •