Results 1 to 7 of 7

Thread: CC World VFR Panel

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member Paul's Avatar
    Join Date
    Dec 2011
    Location
    Gilbert, Arizona
    Posts
    202

    Default CC World VFR Panel

    It's time for another shout out to the CC Carbon Cub Kit team. This week I started on my panel and wiring. Now you have to know that my wiring experience is limited to a Morse code transmitter for a 5th grade science project. So there was a lot of angst as the time drew near to tackle this phase. But Mitch got me going with several coaching calls and then I just couldn't put it down! I'm serious, this is almost more fun that fabric

    The harnesses are amazing. They're perfectly labelled and built in such a way that the point of connection is made pretty obvious even before looking at the wire number, just by the length and placement of the wire. The schematics were really scary at first glance but within a couple hours they became very logical. I'm not kidding about my level of experience....this is the first time I've ever worked with a wiring schematic this complex and after just 3 days (about 12 hours) I'm virtually done the top side of all harnesses.

    Once again, hats off to Mitch and the entire team for great support and an outstanding product...with special thanks to the harness crew!!
    And remember, the World VFR panel was just released a few short months ago!
    Attached Images Attached Images
    Last edited by Paul; 05-21-2014 at 11:55 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •