Results 1 to 7 of 7

Thread: CC World VFR Panel

  1. #1
    Senior Member Paul's Avatar
    Join Date
    Dec 2011
    Location
    Gilbert, Arizona
    Posts
    202

    Default CC World VFR Panel

    It's time for another shout out to the CC Carbon Cub Kit team. This week I started on my panel and wiring. Now you have to know that my wiring experience is limited to a Morse code transmitter for a 5th grade science project. So there was a lot of angst as the time drew near to tackle this phase. But Mitch got me going with several coaching calls and then I just couldn't put it down! I'm serious, this is almost more fun that fabric

    The harnesses are amazing. They're perfectly labelled and built in such a way that the point of connection is made pretty obvious even before looking at the wire number, just by the length and placement of the wire. The schematics were really scary at first glance but within a couple hours they became very logical. I'm not kidding about my level of experience....this is the first time I've ever worked with a wiring schematic this complex and after just 3 days (about 12 hours) I'm virtually done the top side of all harnesses.

    Once again, hats off to Mitch and the entire team for great support and an outstanding product...with special thanks to the harness crew!!
    And remember, the World VFR panel was just released a few short months ago!
    Attached Images Attached Images
    Last edited by Paul; 05-21-2014 at 11:55 PM.

  2. #2
    Senior Member randylervold's Avatar
    Join Date
    Jan 2010
    Location
    Yakima, WA
    Posts
    1,378

    Default Re: CC World VFR Panel

    Thanks for the feedback Paul, good to know that these pre-made panels are working for builders. I seldom get the see the finished product going out (other than aircraft) and like to know what we are presenting to our customers.

    Looks like you'll be flying soon!
    Randy Lervold

  3. #3
    Senior Member N867SP's Avatar
    Join Date
    Oct 2013
    Location
    Severna Park, MD
    Posts
    342

    Default Re: CC World VFR Panel

    Paul, have you given much thought on the mounting of your autopilot in the WVFR panel?


    Sent from my iPad using Tapatalk
    Pete
    ✈️CCK-1865-0078 N9PW
    Severna Park, MD W18

  4. #4
    Senior Member Paul's Avatar
    Join Date
    Dec 2011
    Location
    Gilbert, Arizona
    Posts
    202

    Default Re: CC World VFR Panel

    Quote Originally Posted by N867SP View Post
    Paul, have you given much thought on the mounting of your autopilot in the WVFR panel?
    Sent from my iPad using Tapatalk
    Yes, I've been talking with Mitch on that. I believe where it will be going is right at the bottom centre, in place of the bank indicator. Mitch is working on a template. The other way I've seen it work is with a small extension panel mounted just below the main panel. I'll post pics once it's in.

  5. #5
    Senior Member N867SP's Avatar
    Join Date
    Oct 2013
    Location
    Severna Park, MD
    Posts
    342

    Default Re: CC World VFR Panel

    Thanks Paul, I'm still a ways off from installing my panel. It curious to see how yours comes out.




    Pete
    CCK-1865-0078
    ✈️N9PW
    Severna Park, MD

    Sent from my iPhone 7 using Tapatalk
    Pete
    ✈️CCK-1865-0078 N9PW
    Severna Park, MD W18

  6. #6
    Senior Member
    Join Date
    Feb 2020
    Location
    Varese, ITALY
    Posts
    176

    Default Re: CC World VFR Panel

    Hello Paul,

    I'm wiring my World VFR.
    We have problems with the connectors sizes.

    Would you be so kind to put here more pictures about your installation ?

    Specially about the connections of the CGR-30P vs the tray, and the pitot static tubing, and the exact position of the upper side of the panel.

    Thank you in advance !

    Yves

  7. #7
    Administrator Pete D's Avatar
    Join Date
    Jan 2010
    Location
    Yakima, WA
    Posts
    1,158

    Default Re: CC World VFR Panel

    Quote Originally Posted by PBY Catalina View Post
    Hello Paul,

    I'm wiring my World VFR.
    We have problems with the connectors sizes.

    Would you be so kind to put here more pictures about your installation ?

    Specially about the connections of the CGR-30P vs the tray, and the pitot static tubing, and the exact position of the upper side of the panel.

    Thank you in advance !

    Yves
    Hi Yves,

    I will reach out via email. We have added some more photos to the DropBox. Specific questions via kitsupport@cubcrafters.com with photos we can also assist you with.

    Have a great day!
    Pete Dougherty
    Customer Support Manager
    Cub Crafters Inc

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •