Results 1 to 4 of 4

Thread: Flap handle pin

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member c130jake's Avatar
    Join Date
    Jun 2012
    Location
    Minneapolis, MN
    Posts
    190

    Default Flap handle pin

    I was having a heck of a time getting the pin into the silver flap trigger. Tapping with a hammer wasn't working too well. Then I had an idea, use a rivet squeezer with the bottom die removed so the pin could protrude into the hole.

    Hope this helps.

    Jake


    Sent from my iPad using Tapatalk
    Jake
    Finished CCEX N96FV!

  2. #2
    Senior Member ceslaw's Avatar
    Join Date
    Sep 2013
    Location
    Carterville, IL
    Posts
    589

    Default Re: Flap handle pin

    Nice! I like that one.

  3. #3
    Administrator Pete D's Avatar
    Join Date
    Jan 2010
    Location
    Yakima, WA
    Posts
    1,158

    Default Re: Flap handle pin

    I'm not sure that it is supposed to be that tight...
    Pete Dougherty
    Customer Support Manager
    Cub Crafters Inc

  4. #4
    Senior Member c130jake's Avatar
    Join Date
    Jun 2012
    Location
    Minneapolis, MN
    Posts
    190

    Default Re: Flap handle pin

    The manual make specific mention of the hole orientation...that leads me to believe the pin is not supposed to rotate. I hit the crap out of it and couldn't get it thru. The rivet squeezer took almost no force to push it thru. Not sure what to tell you except the pin doesn't move and the flap handle is assembled.

    Jake


    Sent from my iPad using Tapatalk
    Jake
    Finished CCEX N96FV!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •