Results 1 to 5 of 5

Thread: Hero3 solid mount vs rubber mount

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member carlconti's Avatar
    Join Date
    Jan 2012
    Location
    Melbourne, FL
    Posts
    135

    Default Hero3 solid mount vs rubber mount

    Like many others, I have been experimenting with mounting techniques on the Carbon Cub. I started with an nFlight solid mount. It has many virtues, including great versatility. If you choose modest power levels while filming it works well. On my CC it produces lots of jello at cruise power settings.

    My next attempt was a rubber mount with lots of rubber attached to the tie down fitting under the wing. It was great at high power settings, but awful at low power.

    Third try was a version of the second with much less flexibility. This one, while not absolutely perfect, yields excellent results across almost all power settings. It's good enough that I will stick with it while playing with camera settings.

    The pictures included show the nFlight mount under the right wing (location copied from Gary Lickle's post). Sadly, my CC seems to vibrate more than Gary's. The other picture is the mount on the left wing I will stick with for a while. I will also try the nFlight in other locations.

    See this video for a comparison between the nFlight and the final rubber mount.

    http://youtu.be/2iN5Dk1R7G8

    The rubber mount was very inexpensive as I used old inner tube cutouts, a 1/4 inch long piece of flexible fuel line, mounting pieces that came with the Hero3, and a tripod mount purchased for less than $8. Also fender washers, bolt, nuts etc. The safety wire shown in the picture is to prevent disaster in case of slippage upward. It is isolated from the flexing portion of the mount by the 1/4 inch long 1/4 inch ID fuel line which is on the 1/4-20 bolt between the washers. Another nice feature of this mount is that each axis can be individually adjusted without disturbing the other axes. Also it can be tuned by inserting more rubber disks and/or adjusting the self locking nut.



    nFlight solid mount.jpgrubber mount.jpg
    Last edited by carlconti; 08-07-2013 at 10:34 AM. Reason: change video link

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •