Results 1 to 6 of 6

Thread: Catto 80X50

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member carlconti's Avatar
    Join Date
    Jan 2012
    Location
    Melbourne, FL
    Posts
    135

    Default Catto 80X50

    This is a fantastic prop.

    Does anyone have any insight on how to clean and protect the nickel leading edge from corrosion?

  2. #2
    Senior Member Joseph206's Avatar
    Join Date
    Sep 2012
    Location
    Liberty, NY
    Posts
    108

    Default Re: Catto 80X50

    Quote Originally Posted by carlconti View Post
    This is a fantastic prop.

    Does anyone have any insight on how to clean and protect the nickel leading edge from corrosion?
    Hi Carl,
    Are you using one now???

  3. #3
    Senior Member carlconti's Avatar
    Join Date
    Jan 2012
    Location
    Melbourne, FL
    Posts
    135

    Default Re: Catto 80X50

    Quote Originally Posted by Joseph206 View Post
    Hi Carl,
    Are you using one now???
    Yes. It gives nothing up in cruise and is incredible for takeoff.

    Carl

  4. #4
    Senior Member Joseph206's Avatar
    Join Date
    Sep 2012
    Location
    Liberty, NY
    Posts
    108

    Default Re: Catto 80X50

    Quote Originally Posted by carlconti View Post
    Yes. It gives nothing up in cruise and is incredible for takeoff.

    Carl
    Hi Carl,
    Would you mind if I called you.
    my e-mail is
    Joe@libertyironworks.com
    please e-mail me you number.

  5. #5
    Senior Member carlconti's Avatar
    Join Date
    Jan 2012
    Location
    Melbourne, FL
    Posts
    135

    Default Re: Catto 80X50

    Quote Originally Posted by Joseph206 View Post
    Hi Carl,
    Would you mind if I called you.
    my e-mail is
    Joe@libertyironworks.com
    please e-mail me you number.
    Hi Joseph,

    Call anytime.

    Carl

  6. #6
    Senior Member randylervold's Avatar
    Join Date
    Jan 2010
    Location
    Yakima, WA
    Posts
    1,378

    Default Re: Catto 80X50

    Please be advised that as of this date the Catto 80x50 prop has not been approved by CC. The most recent vibration survey performed by Catto has not been submitted to our engineering department yet for approval. Not sure what version any of you might be running but earlier versions were later tested and found to have a nasty resonance node between 2600 and 2700 rpm.
    Randy Lervold

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •