Results 1 to 3 of 3

Thread: Vernier Mixture?

  1. #1
    Senior Member
    Join Date
    Jan 2010
    Location
    Edgewood, Texas
    Posts
    214

    Default Vernier Mixture?

    My mixture knob tends to creep out during flight. Has anyone installed a vernier mixture knob/cable on a Sport Cub? Or does it need an MRA to get it approved?

    Jon

  2. #2
    Administrator Pete D's Avatar
    Join Date
    Jan 2010
    Location
    Yakima, WA
    Posts
    1,158

    Default Re: Vernier Mixture?

    I have seen one in a Carbon Cub but it was in a home built one.

    You might try ordering one of the new style detented cables that they are using on the production line now. They don't creep and have a nice smooth feel to them compared to the old cable with the slot in the side of the shaft. I THINK this could be done with out an MRA but check and make sure when you order.
    Pete Dougherty
    Customer Support Manager
    Cub Crafters Inc

  3. #3
    Senior Member
    Join Date
    Jan 2010
    Location
    Edgewood, Texas
    Posts
    214

    Default Re: Vernier Mixture?

    Quote Originally Posted by Pete D View Post
    I have seen one in a Carbon Cub but it was in a home built one.

    You might try ordering one of the new style detented cables that they are using on the production line now. They don't creep and have a nice smooth feel to them compared to the old cable with the slot in the side of the shaft. I THINK this could be done with out an MRA but check and make sure when you order.
    Thanks Pete, just ordered the newer style cable. Part numbers are the same as shown in the Carbon Cub parts catalog. Jon

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •