Activity Stream

It is my understanding that CorrosionX is applied to fully metal aircraft. It is not uncommon to have older GA (Cessna, Piper, Beech,...) to have...

I am ready for a set of skin clamps, if anyone has a set available. Darrin 541-480-4834 dlkdvm@gmail.com

love it! Remember Grizzly eat elk for snacks! 😉

The Gamin shunt drops 40 mV at 100A. Why do you need the shunt if the link will drop more voltage than the shunt does? Why not tailor the link length...

This is a great product for corrosion protection and lubrication in one bottle

I'm pleased that I don't fit the "everyone" category.

That looks amazing. It seems like everyone is going with L21 windows these days too!

http://cubcrafters.com/about#history-facility

well since everyone is showing pics..... little bit of a custom job here. but why not. she's currently in Wing prep at the moment.

Horizon Hobby came by the booth at SNF

Thanks for your input. I considered the wire size but thought since the run from the alternator to the OV relay was several feet and with 10 gauge,...

The failure of the circuit breaker is just the same as the failure of the alternator to produce any output. It does not matter whether the shunt is...

I like the idea of a second shunt for monitoring the alternator output. But I'm thinking of putting the shunt between the circuit breaker and the...

Looks like the Highlander did quite a lot better on takeoff. (edited) Also seems to have done well on the landings that qualified. From my...

I was pretty surprised when I saw the insurance rate. I think that with such a great rate I would contract with this company. The problem for me that...

Yep that’s with 1/2 fuel,35” tires and all my stuff in it. Just can’t beat a stock carbon cub performance. ‘OLD GUY😂

Not too bad of numbers this week for an old guy with a hurt back in a stock SS. Nice job Chuck!

Unfortunately, I have not seen such great discounts in recent times!

Pretty cool shot from the STOL at Sun-N-Fun

I finally found a "neutral" silicone here in a giant store. The brand is an Italian one: "SARATOGA", and they provide on their website all SDS...

Good point. The Cleveland Wedge does not replace the butchered rivet puller. One still has to grind that rivet puller to near non functional status.

https://amploc.com/ A few notes that may be of interest to anyone who decides to use these sensors: AMPLOC uses square pins with 0.1 inch...

Good job. Do you have a link to the Hall effect sensor source?

I suppose I should point out that I don't know that the acetic acid will cause any significant corrosion of the spar. I expect kit support can tell...

Thanks Dan, Thanks to you and Andy, I know where to look at now. Rgrs, Yves C.

You will find that most if not all will have acetic acid in them, including the fancy Dow Corning stull AircraftSpruce sells. Acetic acid assists...